Propuesta de Laboratorio de Mediciones Eléctricas para la Universidad Técnica de Manabí

Gilberto Ramiro Holguín-Intriago; María Gabriela Intriago-Cedeño; Gabriel Enrique Pico-Mera; Maricarmen Zambrano-Pinargote

Authors

Holguín-Intriago Gilberto Ramiro Departamento de Eléctrica, Electrónica y Automatización, Universidad Técnica de Manabí. Portoviejo, Ecuador. https://orcid.org/0000-0002-8263-6218
Intriago-Cedeño María Gabriela Departamento de Eléctrica, Electrónica y Automatización, Universidad Técnica de Manabí. Portoviejo, Ecuador. https://orcid.org/0000-0002-7040-046X
Pico-Mera Gabriel Enrique Departamento de Eléctrica, Electrónica y Automatización, Universidad Técnica de Manabí. Portoviejo, Ecuador. https://orcid.org/0000-0001-6373-2805
Zambrano-Pinargote Maricarmen Facultad de Postgrado, Universidad Técnica de Manabí. Portoviejo, Ecuador. https://orcid.org/0009-0004-7490-6670

Keywords:

Lighting, Electrical Installation, Analysis Software, Laboratory

Abstract

This work is focused on the redesign and improvement of the electrical measurements laboratory of the Technical University of Manabí (UTM). For which an exhaustive diagnosis was carried out, problems such as inadequate arrangement of desks, poor electrical installations and poor lighting were identified. Based on these findings, a new laboratory was designed following international standards, considering both technical and pedagogical aspects. The design includes the selection of equipment and tools necessary to develop technical skills in students. In addition, a redesign of the physical environment of the laboratory was proposed, optimizing the arrangement of counters and chairs to maximize comfort and functionality, as well as an adequate lighting system based on Ecuadorian technical regulations. The conditioning of the laboratory seeks to create a collaborative and dynamic learning environment, improving the quality of technical education and strengthening the research capacity of the UTM. The importance of a well-designed environment for student academic performance and research efficiency is highlighted. The implementation of this laboratory represents a significant advance in the educational quality of the UTM, improving the practical training of students and positioning the university as a benchmark in the region. The project includes a thorough diagnosis, meticulous design and careful conditioning, ensuring a valuable and sustainable resource for the university and the community at large.

Keywords: Lighting, Electrical Installation, Analysis Software, Laboratory.

Downloads

Download data is not yet available.

References

Agrawal, A., & Gopal, K. (2013). Good Laboratory Practices in Biomonitoring. In Biomonitoring of Water and Waste Water (pp. 149-166). Springer India. https://doi.org/10.1007/978-81-322-0864-8_14

Bartiromo, R., & Vicenzi, M. D. (2016). Electrical Measurements in the Laboratory Practice (Springer, Ed.). Springer. https://doi.org/https://doi.org/10.1007/978-3-319-31102-9

Gómez, R., & Martínez, S. (2021). Importancia de los laboratorios en la formación de ingenieros eléctricos. Journal of Engineering Education, 19(1), 11. https://doi.org/https://doi.org/10.5678/jee.v19i1.5678

Herrera, L., & Rodríguez, P. (2022). Normativas y estándares para laboratorios eléctricos universitarios. Revista de Normas Técnicas, 15(3), 11. https://doi.org/https://doi.org/10.2345/rnt.v15i3.7890

Jiménez, C., & Morales, E. (2023). Evaluación de necesidades para la implementación de laboratorios técnicos. Tecnología y Educación, 20(4), 12. https://doi.org/https://doi.org/10.4567/tecnologiaeducacion.v20i4.4567

Oliveros, J. A. C., Borges, C. G. R., Rodríguez, J. A. P., & Zambrano, X. H. V. J. R. d. c. s. (2022). Desarrollo del pensamiento crítico: Metodología para fomentar el aprendizaje en ingeniería. 28(4), 512-530. https://dialnet.unirioja.es/servlet/articulo?codigo=8703859

Rodríguez-Borges, C. G., Bowen-Quiroz, C. A., Pérez-Rodríguez, J. A., & Rodríguez-Gámez, M. (2020). Evaluación de las capacidades de aprendizaje colaborativo adquiridas mediante el proyecto integrador de saberes %J Formación universitaria. 13, 239-246. http://www.scielo.cl/scielo.php?script=sci_arttext&pid=S0718-50062020000600239&nrm=iso

Ruiz, D., & Pérez, A. (2020). Ambientes de aprendizaje en laboratorios de mediciones eléctricas. Educational Research Journal, 17(2), 12. https://doi.org/https://doi.org/10.7890/edures.v17i2.7890

Simarro, C., & Couso, D. (2021). Engineering practices as a framework for STEM education: a proposal based on epistemic nuances. International Journal of STEM Education, 8(1). https://doi.org/https://doi.org/10.1186/s40594-021-00310-2

Xavier, A. S. (2022). Good Laboratory Practice (GLP). In M. Lakshmanan, D. G. Shewade, & G. M. Raj (Eds.), Introduction to Basics of Pharmacology and Toxicology: Volume 3: Experimental Pharmacology: Research Methodology and Biostatistics (pp. 685-693). Springer Nature Singapore. https://doi.org/https://doi.org/10.1007/978-981-19-5343-9_50