STUDY OF TALL BUILDINGS LOCATED IN THE CITY OF QUITO WITH TUNED MASS DAMPERS
Keywords:
Steel, Tuned Mass, Tall Buildings, energy dissipationAbstract
The study of the inclusion of energy dissipation systems is essential because it seeks to obtain the efficiency and, if possible, the applicability of protection methods for steel structures of different heights. These systems, properly designed, can be used in several cities in the Ecuadorian Sierra such as the city of Quito. A protection system against large seismic events is proposed, such as the tuned mass damper system. These systems present improvements in energy savings and economy compared to others that perform the same function, but their disadvantage is that they are highly sensitive to changes in the dynamic characteristics of the structure, especially in its natural frequency. The idea behind tuned mass dissipators is that these additional masses can absorb and dissipate the energy generated by seismic vibrations, thus preventing these vibrations from reaching dangerous levels that could damage the building structure or jeopardize the safety of the buildings. people inside it.
Keywords: Steel, Tuned Mass, Tall Buildings, energy dissipation.
Downloads
References
Ambrosini, D., Cuitiño, G., & Rebeco, J. (2004). Eficiencia de Amortiguadores de Masa Sintonizados en Estructuras Sismorresistentes. Buenos Aires.
American Institute of Steel Construction. (2010). Seismic Provisions for Structural Steel Buildings ANSI/AISC 341-10. Estados Unidos.
American Institute of Steel Construction. (2010). Specification for Structural Steel Building AISC 360-10. Estados Unidos.
American Iron and Steel Institute. (s.f.). Steel Bridge Bearing Selection and Design Guide AISI Vol II, Chapter 4. Estados Unidos.
American Society of Civil Engineers. (2010). Minimum Design Loads for Buildings and Other Structures ASCE/SEI 7-10. Reston.
Bassotti, R., & Ambrosini, D. (2007). Sobre la Utilización de Amortiguadores de Masa Sintonizados en la provincia de Mendoza. Córdoba: Asociación Argentina de Mecánica Computacional.
Chey, M. (2007). Passive and Semi-Active Tuned Mass Damper Building Systems. Christchurch.
Connor, J. (2003). Introduction to Structural Motion Control.
Grunahuer, T. S. (2016). Guía práctica para el diseño de estructuras de acero de conformidad con la Norma Ecuatoriana de la Construcción NEC2015. Quito.
Guerra, M. (2015). Diseño Sismorresistente de Edificios utilizando ETABS y NEC 2015. Quito: Bustos Guerra Consultora.
Krenk, S., & Hogsberg, J. (2008). Tuned Mass Absorbers on Damped Structures. Southampton.
Lee, C.-L., Chen, Y.-T., & Wang, Y.-P. (2005). Optimal design theories and applications of tuned mass dampers. Taipei.
McCormac, J., & Csernak, S. (2013). Diseño de Estrucutras de Acero. México DF: Grupo Editor.
Ministerio de Desarrollo Urbano y Vivienda. (2015). Norma Ecuatoriana de la Construcción NEC 2015. Quito.
Ocampo, F. P., Moreno, C., & Thomson, P. (s.f.). Diseño e Implementación de un Amortiguador de Masa Sintonizada (TMD) robusto para disminuir la Respuesta Dinámica en Estrcutura Metálica. Cali.
Ross, M., Rao, B., Iyer, N., & Mohan Rao, R. (s.f.). Response of Steel Framed Building with Tuned Mass Damper for Site-Specific Earthquakes.
Salvi, J., Rizzi, E., & Gavazzeni, M. (2014). Analysis on the optimum performance of Tuned Mass Damper devices. Porto.
Salvi, J., Rizzi, E., Rustighi, E., & Ferguson, N. (2013). Analysis and Optimisation of Tuned Mass Damper. Pisa.
Septimiu, G., & Pastia, C. (2013). Passive Tuned Mass Damper for Seismic Protection. Iaşi.
Tuan, A., & Shang, G. (2014). Vibration Control in a 101-Storey Building Using a. Tamsui.
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Scientific Journal INGENIAR: Engineering, Technology and Research
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
